Multi format Cable Tester Pronomic – A MUST for all on-stage entertainers! Check your cables anywhere. No more broken cables!



  • Multi-format cable tester
  • Split mode with separate transmitter and receiver
  • Ideal for already laid cables
  • Acoustic and optical control by LEDs and sound
  • Cable test and sound test
  • Incl. two test leads with test probes
  •  3 years warranty


Only 1 left in stock


Multi format Cable Tester Pronomic with Separate Transmitter and Receiver!

The Multi format Cable Tester Pronomic has the most common cable connectors for audio electronic devices, such as; XLR (3- and 5-pin); SPK (Speakon); MIDI, 1/4 “(6.35mm and 3.5mm) jacks; RJ11 digital and RJ45; plus BNC and RCA (RCA). The cable tester is in a two-part housing, which can be easily put together for transport. Thanks to the 2-part split mode, fixed cables can also be conveniently tested over longer distances.

Easy to use;
Plug one end of the cable into the “A”; and the other end into “B” housing sections and select the desired measuring method with the built-in switches. The signal is sent over all poles of the cable. The coloured LED’s indicate the signal strength and the connected poles. In addition; an acoustic signal sounds when the flow rate is correct. If there is a faulty connection; no beep will sound and the LED’s will remain dark. The transmitter unit “B” also has a switch for selecting the test speed and the power on and off switch.

Tone test;
The 3-way selector switch on the receiver unit “A” of the Pronomic MCT-Pro; allows switching between “Cable test” and “Tone test”. The Tone test function can be used to test the signal of a speaker cable that is already connected to the PA; or a speaker. Furthermore; it is possible to switch the level between -50 dB; -10 dB and 0 dB on the unit “A”.

Test leads with test probes;

The enclosed test probe lead can be used to check the signal passage between each type of conductor. The test leads are simply connected with the banana plugs into the plus / minus sockets on the housing part “A”. If the passage is correct,; a beep sounds again.

Compact and portable
Thanks to its plug-in construction in a robust plastic housing; the Pronomic MCT-Pro cable tester can be used in the studio as well as on the road. Both housing halves are separately supplied with power and each requires a 9V block battery.

No more broken cables at the gig; thanks to the Pronomic MCT-Pro cable tester!


  • A pro Multi-format cable tester
  • With 2-part split mode with separate transmitter and receiver
  • This is ideal for long, already laid cables
  • It has 8 LED’s each for visual inspection
  • Also an acoustic sound at passage
  • With selectable test speed and levels (-50 dB, -10 dB and 0 dB)
  • Includes cable test and sound test
  • With 2 x Speakon 4pol
  • And 2 x XLR 5pol
  • Also; 2 x XLR 3pol
  • As well as; 2 x Din 3pol / 5pol
  • With 2 x RCA (Chinch)
  • 2 x BNC
  • 2 x RJ45


  • It has 2 x RJ11 sockets
  • And; 2 x 6.35 mm jack
  • with 2 x 3.5 mm jack
  • Also; 2 x banana plugs
  • Power supply: 2 x 9V battery (not included)
  • Material: Plastic
  • Dimensions (H x W x D): 3.5 x 16.5 x 17.5 cm
  • Weight: 0.9 kg
  • Colour: Black
  • Incl. two test leads with test probes
What you get;
  • 1 x Pronomic MCT-Pro Cable Tester 2-piece
  • 2 x probe cable

For any Questions about our Multi format Cable Tester Pronomic; or for Prices on delivery to the EU: